Terminal Logging; Terminal Monitor - HP 6125G Command Reference Manual

Use undo terminal debugging to disable the display of debugging information on the current terminal.
By default, the display of debugging information on the current terminal is disabled.
To view debug information, execute the terminal monitor and terminal debugging commands, enable
information center (enabled by default), and finally use a debugging command to enable the related
debugging.
The configuration of this command is only valid for the current connection between the terminal and the
switch. If a new connection is established, the display of debugging information on the terminal restores
the default.
Examples
# Enable the display of debugging information on the current terminal.
<Sysname> terminal debugging
Info: Current terminal debugging is on.

terminal logging

Syntax
terminal logging
undo terminal logging
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use terminal logging to enable the display of log information on the current terminal.
Use undo terminal logging to disable the display of log information on the current terminal.
By default, the display of log information is enabled on both the current terminal and the console.
To view the log information, execute the terminal monitor and terminal logging commands, and then
enable information center (enabled by default).
The configuration of this command is only valid for the current connection between the terminal and the
switch. If a new connection is established, the display of log information on the terminal restores the
default.
Examples
# Disable the display of log information on the current terminal.
<Sysname> undo terminal logging
Info: Current terminal logging is off.

terminal monitor

Syntax
terminal monitor
51