Configuring Rmon Statistics (Cli Example); Configuring Rmon Statistics (Bbi Example) - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Application Manual

Configuring RMON Statistics (CLI example)

1.
Enable RMON on each port where you wish to collect RMON statistics.
>> /cfg/port 23/rmon
>> Port 23 RMON# ena
>> Port 23 RMON# apply
>> Port 23 RMON# save
2.
View RMON statistics for the port.
>> /stats/port 23
>> Port Statistics# rmon
------------------------------------------------------------------
RMON statistics for port 23:
etherStatsDropEvents:
etherStatsOctets:
etherStatsPkts:
etherStatsBroadcastPkts:
etherStatsMulticastPkts:
etherStatsCRCAlignErrors:
etherStatsUndersizePkts:
etherStatsOversizePkts:
etherStatsFragments:
etherStatsJabbers:
etherStatsCollisions:
etherStatsPkts64Octets:
etherStatsPkts65to127Octets:
etherStatsPkts128to255Octets:
etherStatsPkts256to511Octets:
etherStatsPkts512to1023Octets:
etherStatsPkts1024to1518Octets:

Configuring RMON Statistics (BBI example)

1.
Configure ports.
Click the Configure context button.
a.
Select Switch Ports (click the underlined text, not the folder).
b.
Remote monitoring
(Select Port 23 RMON)
(Enable RMON)
(Make your changes active)
(Save for restore after reboot)
(Select Port 23 Stats)
NA
7305626
48686
4380
6612
22
0
0
2
0
0
27445
12253
1046
619
7283
38
153