Destination Ipv6 - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Default
No destination IPv4 address is configured for an operation.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
UDP tracert operation view
ICMP jitter/path jitter/UDP jitter/voice operation view
DNS/ICMP/RADIUS/SSL/TCP/TCP half open/UDP template view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Specifies the destination IPv4 address for the operation.
Examples
# Specify 10.1.1.1 as the destination IPv4 address for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1
# In ICMP template view, specify 10.1.1.1 as the destination IPv4 address for the ICMP echo
operation.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] destination ip 10.1.1.1

destination ipv6

Use destination ipv6 to configure the destination IPv6 address for the operation.
Use undo destination ipv6 to restore the default.
Syntax
destination ipv6 ipv6-address
undo destination ipv6
Default
No destination IPv6 address is configured for an operation.
Views
ICMP echo operation view
DNS/ICMP/RADIUS/SSL/TCP/TCP half open/UDP template view
Predefined user roles
network-admin
mdc-admin
18