Setting The Log Host - HP 1920 Gigabit Ethernet Switch Series User Manual

Table 12 Field description
Field
Time/Date
Source
Level
Digest
Description

Setting the log host

1. Select Device > Syslog from the navigation tree.
2. Click the Loghost tab.
The log host configuration page appears.
Figure 51 Setting the log host
3. Configure the log host as described in
Description
Displays the time/date when the system log was generated.
Displays the module that generated the system log.
Displays the severity level of the system log. The information is classified into eight
levels by severity:
•
Emergency—The system is unusable.
•
Alert—Action must be taken immediately.
•
Critical—Critical condition.
•
Error—Error condition.
•
Warning—Warning condition.
•
Notification—Normal but significant condition.
•
Information—Informational message.
•
Debug—Debug-level message.
Displays the brief description of the system log.
Displays the content of the system log.
Table
62
13.