Download Print this page

HP A3100-8 v2 EI Configuration Manual: Displaying And Maintaining Information Center; Information Center Configuration Examples; Outputting Log Information To A Unix Log Host

A3100 v2 switch series.
Hide thumbs

Advertisement

Displaying and maintaining information center

To do...
Display the information about
information channels
Display the information about each
output destination
Display the state of the log buffer
and the log information recorded
Display a summary of the log
buffer
Display the state of the trap buffer
and the trap information recorded
Reset the log buffer
Reset the trap buffer

Information center configuration examples

Outputting log information to a UNIX log host

Network requirements
Send log information to a UNIX log host with an IP address of 1.2.0.1/16;
Log information with severity higher than or equal to informational will be output to the log host;
The source modules are ARP and IP.
Figure 54 Network diagram for outputting log information to a UNIX log host
Configuration procedure
Before the configuration, make sure that Device and PC are reachable to each other.
Configure the device
1.
# Enable information center.
<Sysname> system-view
[Sysname] info-center enable
Use the command...
display channel [ channel-number
| channel-name ] [ | { begin |
exclude | include }
regular-expression ]
display info-center
display logbuffer [ reverse ] [ level
severity | size buffersize | slot
slot-number ] * [ | { begin |
exclude | include }
regular-expression ]
display logbuffer summary [ level
severity | slot slot-number ] * [ |
{ begin | exclude | include }
regular-expression ]
display trapbuffer [ reverse ] [ size
buffersize ] [ | { begin | exclude |
include } regular-expression ]
reset logbuffer
reset trapbuffer
170
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view

Advertisement

   Also See for HP A3100-8 v2 EI

   Related Manuals for HP A3100-8 v2 EI

Comments to this Manuals

Symbols: 0
Latest comments: