Download Print this page

Advertisement

Step
8.
(Optional.) Set the lowest level
of logs that can be output to
the monitor terminal.

Outputting logs to a log host

Step
1.
Enter system view.
2.
Enable the information
center.
3.
Configure an output rule
for outputting logs to a
log host.
4.
(Optional.) Specify the
source IP address for
output logs.
5.
(Optional.) Specify the
format for logs sent to a
log host.
6.
(Optional.) Configure
the timestamp format.
7.
Specify a log host and
configure related
parameters.
Outputting logs to the log buffer
Step
1.
Enter system view.
2.
Enable the information center.
3.
Enable log output to the log
buffer.
Command
terminal logging level severity
Command
system-view
info-center enable
info-center source { module-name |
default } { console | monitor |
logbuffer | logfile | loghost } { deny
| level severity }
info-center loghost source
interface-type interface-number
info-center format { unicom | cmcc }
info-center timestamp loghost { date
| iso [ with-timezone ] |
no-year-date | none }
info-center loghost [ vpn-instance
vpn-instance-name ] { loghost | ipv6
loghost } [ port port-number ]
[ facility local-number ]
Command
system-view
info-center enable
info-center logbuffer
84
Remarks
The default setting is 6
(informational).
Remarks
N/A
By default, the information center is
enabled.
For information about default output
rules, see
"Default output rules for
logs."
By default, the source IP address of
output log information is the primary IP
address of the matching route's egress
interface.
By default, logs are sent in HP format to
a log host.
By default, the timestamp format is
date.
The with-timezone keyword is
available in Release 2311P04 and
later versions.
By default, no log host or related
parameters are specified.
The value of the port-number argument
must be the same as the value
configured on the log host. Otherwise,
the log host cannot receive logs.
Remarks
N/A
By default, the information center is
enabled.
By default, log output to the log
buffer is enabled.

Advertisement

This manual also for:

5900

Comments to this Manuals

Symbols: 0
Latest comments: