Backing Up The Settings - Epson ET-L15150 Series User Manual

Administrator Information
Items
Maintenance box: nearing end
Administrator password changed
Paper out
Printing stopped*
Printer error
Scanner error
Fax error
Wi-Fi failure
Related Information
"Configuring Email Notification" on page 426
&

Backing Up the Settings

You can export the setting value set from Web Config to the file. You can use it for backing up the contacts, setting
values, replacing the printer, etc.
The exported file cannot be edited because it is exported as a binary file.
Export the settings
Export the setting for the printer.
1. Access Web Config, and then select the Device Management tab > Export and Import Setting Value >
Export.
2. Select the settings that you want to export.
Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so
on) cannot be selected.
3. Enter a password to encrypt the exported file.
You need the password to import the file. Leave this blank if you do not want to encrypt the file.
4. Click Export.
Important:
c
If you want to export the printer's network settings such as the device name and IPv6 address, select Enable to
select the individual settings of device and select more items. Only use the selected values for the replacement
printer.
> >
Managing the Printer
Notice when the maintenance box is nearing full.
Notice when administrator password has been changed.
Notice when the paper-out error has occurred in the specified paper source..
Notice when the printing is stopped due to paper jam or paper cassette not set.
Notice when the printer error has occurred.
Notice when the scanner error has occurred.
Notice when the fax error has occurred.
Notice when the error of the wireless LAN interface has occurred.
427
Backing Up the Settings
Settings and Explanation