Locking/Releasing The Carriage - Epson Stylus Office T1110 Service Manual

_______________________________________________________________________________________
WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
4.1.4.1 Protection for Transportation (Securing the Carriage)
Before packing the printer to be returned to the user, attach a piece of strong tape
(length: 250 mm, fold one end: 5 mm) to the carriage to prevent damage during
transportation.
1. Attach the unfolded end of the strong tape on the bottom left of the carriage as
shown in Figure 4-1.
2. Pull the tape and make it adhere to the left side of the carriage.
3. Move the carriage in the direction of the arrow (130 digit side) in
it touches the Carriage Lock.
4. Pull the tape toward the right side of the housing and attach it tightly along the
shapes of the housing as shown in
Step1-2
15 mm
Attach the tape on the
housing to leave any gap.
Figure 4-1. Securing the Carriage
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/
Disassembly And Assembly
高速行式打印机 http://www.lineprinter.com.cn/
Figure 4-1
Figure 4-1 to secure the carriage.
Step3
Folded end

4.1.5 Locking/Releasing the Carriage

Locking and releasing the Carriage is shown below.
1. Remove the Decoration Plate Right.
(p.71).)
2. Insert a phillips screwdriver into the hole on the right side of the frame, and rotate
the white shaft of the Ink System Unit.
until
Counterclockwise (CCW)
Step4
打印机驱动下载 http://www.printerwhy.com/
Overview
(Refer to 4.2.6 Decoration Plate Left/Right
Table 4-4. Carriage Lock/Release
Direction of Rotation Carriage
Clockwise (CW) Locked
Released
CCW
CW
White Shaft
Figure 4-2. Release the Carriage Lock
Revision A
65
Confidential