Installing The Drive - Magnetek Impulse G+ series 4 Instruction Manual

Installing the Drive

To install IMPULSE
1. Ensure the drive will be used in a proper environment. Refer to page 1-5.
2. Review "IMPULSE
3. Determine the sizes and connection locations for the drive components and external devices
that need to be wired. Locate the ground.
4. Determine the proper drive orientation on the subpanel to maintain proper cooling (see Figure 2-
2).
®
•G+ & VG+ Series 4:
®
•G+ & VG+ Series 4 Terminal Block Configuration" on page 3-12.
Figure 2-2: Correct Installation Orientation
IMPULSE®•G+ & VG+ Series 4 Instruction Manual - February 2017
2-7