Dip Switches - Magnetek Impulse G+ series 4 Instruction Manual

Table 3-5: Terminal and Wire Specifications

Dip Switches

DIP Switches are described in this section. The functions of the DIP switches are shown in the table
below.
Table 3-6: DIP Switches
Name
S1
S2
S3
S4
S5
IMPULSE®•G+ & VG+ Series 4 Instruction Manual - February 2017
3-18
Terminal Terminal
Symbol Screw
TB M3
Function
V: 0 to 10 VDC or -10 to 10 VDC (internal resistance: 20 ) (default)
Input method for
I: 4-20mA (internal resistance: 250 )
analog input A2
RS-485 and RS-422
OFF: No terminating resistance (default)
terminating
ON: Terminating resistance of 120 
resistance
Hardware Base
See page 3-19 for setting details
Block Configuration
Analog 3/PTC input AI: A3 is used as Analog Input 3 (default)
select PTC: A3 is used with a Positive Temperature Coefficient (PTC) thermistor
Output method for V: 0 to 10 VDC or -10 VDC to 10 VDC (default)
analog output FM I: 4 to 20 mA
Clamping Torque
Lb-in (N-m)
4.2 to 5.3
(Stranded: 0.14 to 1.5)
(0.5 to 0.6)
Setting
Wire Range
2
AWG (mm )
26 to 16
(Solid: 0.14 to 1.5)