Micro-Speed - Magnetek Impulse G+ series 4 Instruction Manual

Micro-Speed™

Micro-Speed provides a reduced speed range operation for precise positioning. Enabled by a Multi-
Function Input, it multiplies the normal speed reference by the Micro-Speed Gain. Two Micro-Speed
Gains are available: Gain 1 (C02-01) and Gain 2 (C02-02). They can be adjusted and enabled
independently.
Parameter
C02-01
C02-02
NOTE: If both Micro-Speed 1 and Micro-Speed 2 are enabled, Micro-Speed 1 always takes higher
priority over Micro-Speed 2.
IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
5-18
Table 5-17: Micro-Speed Parameter Settings
Display Function
MicroSpd Gain 1 The multiplier of the Analog or
Digital Speed Reference to
achieve slow-speed operation.
Multi Function Digital Input = E
MicroSpd Gain 2 An alternate multiplier of the
Analog or Digital Speed Reference
to achieve slow-speed operation.
Multi Function Digital Input = 10
Figure 5-9: Micro-Speed Control
Range Default
Hoist: 0.01–1.00 1.00
Traverse: 0.01–2.55
Hoist: 0.01–1.00 1.00
Traverse: 0.01–2.55