Parameter Modes - Magnetek Impulse G+ series 4 Instruction Manual

Parameter Modes

All parameters are organized under four modes:
Operation Mode
Drive operation is enabled. Drive status LED is lit.
Programming Mode
Parameter access levels, control method, motion, speed reference, and passwords are selected.
Parameters are set/read. Items to be set/read vary depending on the access level setting.
Auto-Tuning Mode
Automatically calculates and sets motor parameters to optimize drive performance.
Modified Constants Mode
Only parameters that have been changed from the factory settings are set/read.
®
IMPULSE •G+ & VG+ Series 4 Menu Structure
Initialize*
*Refer to parameter list on page 4-8.
Figure 4-1: IMPULSE®•G+ & VG+ Menu Structure
IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
4-7