Ethernet Option Card Set-Up (Ethernet Ip & Modbus Tcp/Ip) - Magnetek Impulse G+ series 4 Instruction Manual

Parameter
F06-55
F06-56
F06-57
F06-58
F06-59
F06-60
F06-61
F06-62
F06-63
Ethernet Option Card Set-up (Ethernet IP & Modbus TCP/IP)
Settings for communication option cards SI-EN3 and SI-EM3.
Parameter
F07-01
F07-02
F07-03
F07-04
F07-05
F07-06
F07-07
F07-08
F07-09
F07-10
F07-11
F07-12
F07-13
IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
5-84
Display Function
DN BAUD RATE MEM Displays the baud rate of the
DeviceNet network. (Read Only -
Monitor)
0 125 kbps
1 250 kbps
2 500 kbps
DN Speed Scale Sets the scaling factor for the
speed monitor in DeviceNet.
DN Current Scale Sets the scaling factor for the
output current monitor in
DeviceNet.
DN Torque Scale Sets the scaling factor for the
torque monitor in DeviceNet.
DN Power Scale Sets the scaling factor for the
power monitor in DeviceNet.
DN Voltage Scale Sets the scaling factor for the
voltage monitor in DeviceNet.
DN Time Scale Sets the scaling factor for the
time monitor in DeviceNet.
DN Heart Beat Sets the heartbeat interval for
DeviceNet communications.
A setting of 0 disables the
heartbeat.
DN MAC ID MEM Displays the DeviceNet MacID
assigned to the drive (Read Only -
Monitor).
Table 5-70: Communication Option Card Parameter Settings
Display Function
IP Address 1 IP Address 1
IP Address 2 IP Address 2
IP Address 3 IP Address 3
IP Address 4 IP Address 4
Subnet Mask 1 Subnet Mask 1
Subnet Mask 2 Subnet Mask 2
Subnet Mask 3 Subnet Mask 3
Subnet Mask 4 Subnet Mask 4
Gateway IP Add 1 Gateway Address 1
Gateway IP Add 2 Gateway Address 2
Gateway IP Add 3 Gateway Address 3
Gateway IP Add 4 Gateway Address 4
IP Add Mode Sel Sets how the option card IP
Address is set at start up
0 User Defined
1 BOOTP
2 DHCP
Range Default
0–2 0
-15–15 0
-15–15 0
-15–15 0
-15–15 0
-15–15 0
-15–15 0
0–10 0
0–63 0
Range Default
0–255 192
0–255 168
0–255 1
0–255 20
0–255 255
0–255 255
0–255 255
0–255 0
0–255 192
0–255 168
0–255 1
0–255 1
0–2 2