Cisco Catalyst 4500 Series Configuration Manual page 341

Chapter 2
ip admission proxy http refresh-all
To ensure that you see a customized WebAuth login page with the same name in the switch system
directory as a same-named prior login page, use the ip admission proxy http refresh-all command.
Syntax Description success
failure
refresh-all
login expired
login page
Command Default
If you do not enter this command, if any of the customized web-based authentication page files with the
file of same name have been changed, you see the old login page rather than the new file.
Command Modes Global configuration mode
Command History Release
15.0(2)SG
Usage Guidelines You should enter this command whenever the customized web-based authentication page has been
changed in the system directory.
Examples The following example shows how to enter this command:
Switch# config terminal
Enter configuration commands, one per line.
Switch(config)# ip admission proxy http [success | failure | refresh-all | login]
Switch(config)# end
Switch#
<The new html page is observed.>
ip admission proxy http [success | failure | refresh-all | login [expired | page]]
Successful authentication proxy.
Failed authentication proxy.
Refresh all custom html pages.
Specify expired webpage
Specify customized login webpage
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
ip admission proxy http refresh-all
End with CNTL/Z.
2-301