Debug Dot1X - Cisco 4500M Command Reference Manual

debug dot1x

debug dot1x
To enable debugging for the 802.1x feature, use the debug dot1x command. Use the no form of this
command to disable debugging output.
Syntax Description
all
errors
events
packets
registry
state-machine
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
Related Commands
show dot1x
undebug dot1x (same as no debug dot1x)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-48
debug dot1x {all | errors | events | packets | registry | state-machine }
no debug dot1x {all | errors | events | packets | registry | state-machine }
Enables debugging of all conditions.
Enables debugging of print statements guarded by the dot1x error flag.
Enables debugging of print statements guarded by the dot1x events flag.
All incoming dot1x packets are printed with packet and interface information.
Enables debugging of print statements guarded by the dot1x registry flag.
Enables debugging of print statements guarded by the dot1x registry flag.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01