Cisco Catalyst 4500 Series Configuration Manual page 212

debug port-security
debug port-security
To debug port security, use the debug port-security command. To disable the debugging output, use the
no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(13)EW
Examples The following example shows how to enable all PM debugging:
Switch# debug port-security
Switch#
Related Commands Command
switchport port-security
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-174
debug port-security
no debug port-security
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Enables port security on an interface.
OL-30934-01