Cisco Catalyst 4500 Series Configuration Manual page 647

Chapter 2
profile
To enter profile call-home configuration submode, use the profile command in call-home configuration
mode, use the profile command.
Syntax Description profile_name
Command Default
This command has no default settings.
Command Modes cfg-call-home
Command History Release
12.2(52)SG
Usage Guidelines
When you enter the profile profile_name command in call-home mode, the prompt changes to
Switch(cfg-call-home-profile)#, and you have access to the following profile configuration commands:
•
•
•
•
•
•
•
•
•
•
•
•
•
profile profile_name
Specifies the profile name.
Modification
This command was introduced on the Catalyst 4500 series switch.
active
destination address
destination message-size-limit bytes
destination preferred-msg-format
destination transport-method
end
exit
subscribe-to-alert-group all
subscribe-to-alert-group configuration
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory
subscribe-to-alert-group syslog
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
profile
2-607