Clear Pagp - Cisco Catalyst 4500 Series Configuration Manual

clear pagp

clear pagp
To clear the port-channel information, use the clear pagp command.
Syntax Description
group-number
counters
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples The following example shows how to clear the port-channel information for a specific group:
Switch# clear pagp 32
Switch#
The following example shows how to clear all the port-channel traffic filters:
Switch# clear pagp counters
Switch#
Related Commands Command
show pagp
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-128
clear pagp {group-number | counters}
Channel-group number; valid values are from 1 to 64.
Clears traffic filters.
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays information about the port channel.
OL-30934-01