Show Ip Source Binding - Cisco Catalyst 4500 Series Configuration Manual

show ip source binding

show ip source binding
To display IP source bindings that are configured on the system, use the show ip source binding EXEC
command.
Syntax Description ip-address
mac-address
dhcp-snooping
static
vlan vlan-id
interface interface-name
Command Default Displays both static and DHCP snooping bindings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(19)EW
Usage Guidelines The optional parameters filter the display output result.
Examples
The following example shows how to display the IP source bindings:
Switch# show ip source binding
MacAddress
------------------
00:00:00:0A:00:0B
Switch#
The following example shows how to display the static IP binding entry of IP address 11.0.01:
Switch# show ip source binding 11.0.0.1 0000.000A.000B static vlan 10 interface Fa6/10
show ip source binding 11.0.0.1 0000.000A.000B static vlan 10 interface Fa6/10
MacAddress
------------------
00:00:00:0A:00:0B
Switch#
Related Commands Command
ip source binding
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-802
show ip source binding [ip-address] [mac-address] [dhcp-snooping | static] [vlan vlan-id]
[interface interface-name]
Modification
This command was introduced on the Catalyst 4500 series switch.
IpAddress
---------------
11.0.0.1
IpAddress
---------------
11.0.0.1
(Optional) Binding IP address.
(Optional) Binding MAC address.
(Optional) DHCP-snooping type binding.
(Optional) Statically configured binding.
(Optional) VLAN number.
(Optional) Binding interface.
Lease(sec) Type
---------- -------------
infinite static
Lease(sec) Type
---------- -------------
infinite static
Description
Adds or deletes a static IP source binding entry.
Chapter 2
VLAN Interface
---- --------------------
10 FastEthernet6/10
VLAN Interface
---- --------------------
10 FastEthernet6/10
OL-30934-01