Cisco Catalyst 4500 Series Configuration Manual page 711

Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 2
All ports on the 24-port modules and the 48-port modules are multiplexed through a Stub ASIC. Some
examples of ports multiplexed through a Stub ASIC are as follows:
Examples
The following example shows how to configure a maximum bandwidth (70 percent) for the interface
fa3/1:
Switch(config)# interface fastethernet3/1
Switch(config-if)# tx-queue 3
Switch(config-if-tx-queue)# shape 70m
Switch(config-if-tx-queue)#
10/100 ports on the WS-X4148-RJ45 module
10/100/1000 ports on the WS-X4124-GB-RJ45 module
10/100/1000 ports on the WS-X4448-GB-RJ45 module
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
shape (interface configuration)
2-671

Advertisement

Table of Contents
loading

Table of Contents