Show Ip Arp Inspection Log - Cisco Catalyst 4500 Series Configuration Manual

show ip arp inspection log

show ip arp inspection log
To show the status of the log buffer, use the show ip arp inspection log command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(19)EW
Examples
The following example shows how to display the current contents of the log buffer before and after the
buffers are cleared:
Switch# show ip arp inspection log
Total Log Buffer Size : 10
Syslog rate : 0 entries per 10 seconds.
Interface
---------------
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Switch#
The following example shows how to clear the buffer with the clear ip arp inspection log command:
Switch# clear ip arp inspection log
Switch# show ip arp inspection log
Total Log Buffer Size : 10
Syslog rate : 0 entries per 10 seconds.
No entries in log buffer.
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-768
show ip arp inspection log
Modification
This command was introduced on the Catalyst 4500 series switch.
Vlan Sender MAC
----- -----------------
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
-- --
Sender IP
---------------
1.1.1.2
1.1.1.3
1.1.1.4
1.1.1.5
1.1.1.6
1.1.1.7
1.1.1.8
1.1.1.9
1.1.1.10
1.1.1.11
-- --
Num of Pkts
-----------
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
5(12:02:52 UTC Fri Apr 25 2003)
Chapter 2
OL-30934-01