Cisco Catalyst 4500 Series Configuration Manual page 110

auto security
auto security
To enable auto security globally, use the auto security command. Use the no form of this command to
disable auto security.
Syntax Description
This command has no arguments or keywords.
Command Default none
Command Modes Interface configuration mode
Command History Release
3.6.0E
Usage Guidelines Relevant baseline security feature CLI as shown in the output of the show auto security command is
applied on or removed from access and trunk ports.
Examples The following example shows how to enable auto security globally:
Switch(config)# auto security
Switch# show running-config | i security
auto security
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-72
auto security
no auto security
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-30934-01