Cisco Catalyst 4500 Series Configuration Manual page 176

control-plane
! Define aggregate control plane service for the active Route Processor.
Switch(config)# macro global apply system-cpp
Switch(config)# control-plane
Switch(config-cp)# service-police input system-cpp-policy
Switch(config-cp)# exit
Related Commands Command
class
class-map
match access-group (refer to
the Cisco IOS Release 12.2
Command Reference)
policy-map
service-policy (interface
configuration)
show policy-map
control-plane
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-138
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Specifies the name of the class whose traffic policy you want to
create or change.
Creates a class map to be used for matching packets to the class
whose name you specify and to enter class-map configuration
mode.
Configures the match criteria for a class map on the basis of the
specified access control list (ACL).
Creates a policy map that can be attached to multiple ports to
specify a service policy and to enter policy-map configuration
mode.
Attaches a policy map to an interface.
Displays the configuration either of a class or of all classes for the
policy map of a control plane.
OL-30934-01