Cisco Catalyst 4500 Series Configuration Manual page 529
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
media-type
To select the connector for a dual-mode capable port, use the media-type command.
Syntax Description
rj45
sfp
Command Default
sfp
Command Modes
Interface configuration mode
Command History
Release
12.2(20)EWA
Usage Guidelines
This command is supported on all ports on the WS-X4306-GB-T module and ports 1/45-48 on the
WS-X4948 chassis.
Entering the show interface capabilities command provides the Multiple Media Types field, which
displays the value no if a port is not dual-mode capable and lists the media types (sfp and rj45) for
dual-mode capable ports.
Examples
The following example shows how to configure port 5/45 on a WS-X4948 chassis to use the RJ-45
connector:
Switch(config)# interface gigabitethernet 5/45
Switch(config-if)# media-type rj45
media-type {rj45 | sfp}
Uses the RJ-45 connector.
Uses the SFP connector.
Modification
This command was introduced for the WS-X4306-GB-T module and the
WS-X4948 chassis.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
media-type
2-489
Advertisement
Table of Contents
