Show Ipv6 Mld Snooping Mrouter - Cisco Catalyst 4500 Series Configuration Manual

show ipv6 mld snooping mrouter

show ipv6 mld snooping mrouter
To display dynamically learned and manually configured IP version 6 (IPv6) Multicast Listener
Discovery (MLD) switch ports for the switch or a VLAN, use the show ipv6 mld snooping mrouter
command.
Syntax Description vlan vlan-id
Command Modes
User EXEC mode
Command History Release
12.2(40)SG
Usage Guidelines Use this command to display MLD snooping switch ports for the switch or for a specific VLAN.
VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI VLANs and cannot be used
in MLD snooping.
Examples
This is an example of output from the show ipv6 mld snooping mrouter command. It displays snooping
characteristics for all VLANs on the switch that are participating in MLD snooping.
Switch> show ipv6 mld snooping mrouter
Vlan
----
2
72
200
This is an example of output from the show ipv6 mld snooping mrouter vlan command. It shows
multicast switch ports for a specific VLAN.
Switch> show ipv6 mld snooping mrouter vlan 100
Vlan
----
2
Related Commands Command
ipv6 mld snooping
ipv6 mld snooping vlan
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-820
show ipv6 mld snooping mrouter [vlan vlan-id]
(Optional) Specifies a VLAN; the range is 1 to 1001 and 1006 to 4094.
Modification
This command was introduced on Catalyst 4500.
ports
-----
Gi1/0/11(dynamic)
Gi1/0/11(dynamic)
Gi1/0/11(dynamic)
ports
-----
Gi1/0/11(dynamic)
Description
Enables IP version 6 (IPv6) Multicast Listener Discovery
(MLD) snooping globally or on the specified VLAN.
Configures IP version 6 (IPv6) Multicast Listener
Discovery (MLD) snooping parameters on the VLAN
interface.
Chapter 2
OL-30934-01