Cisco Catalyst 4500 Series Configuration Manual page 431

Chapter 2
Examples The following example shows how to globally set the last-listener query interval to 2 seconds:
Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# ipv6 mld snooping last-listener-query-interval 2000
Switch(config)# end
Switch#
The following example shows how to set the last-listener query interval for VLAN 1 to 5.5 seconds:
Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# ipv6 mld snooping vlan 1 last-listener-query-interval 5500
Switch(config)# end
Switch#
You can verify your settings by entering the show ipv6 MLD snooping [vlan vlan-id] user EXEC
command.
Related Commands Command
ipv6 mld snooping
last-listener-query-count
show ipv6 mld snooping querier
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
ipv6 mld snooping last-listener-query-interval
End with CNTL/Z.
End with CNTL/Z.
Description
Configures IP version 6 (IPv6) Multicast Listener
Discovery Mulitcast Address Specific Queries (MASQs)
that will be sent before aging out a client.
Displays IP version 6 (IPv6) MLD snooping querier-related
information most recently received by the switch or the
VLAN.
2-391