Cisco Catalyst 4500 Series Configuration Manual page 636

pppoe intermediate-agent vendor-tag strip
pppoe intermediate-agent vendor-tag strip
This command takes effect only if you enable the pppoe intermediate-agent interface configuration
Note
command and the pppoe intermediate-agent trust command.
To enable vendor-tag stripping on PPPoE Discovery packets from PPPoE Server (or BRAS), use the
pppoe intermediate-agent vendor-tag strip command. To disable this setting, use the no form of this
command.
Syntax Description This command has no arguments or keywords.
Command Default
vendor-tag stripping is turned off.
Command Modes
Interface configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
This command has no effect on untrusted interfaces.
Use this command on a PPPoE Intermediate Agent trusted interface to strip off the vendor-specific tags
in PPPoE Discovery packets that arrive downstream from the PPPoE Server (or BRAS), if any.
Examples
The following example shows how to set vendor-tag stripping on an interface:
Switch(config-if)# pppoe intermediate-agent vendor-tag strip
The following example shows how to disable vendor-tag stripping on an interface:
Switch(config-if)# no pppoe intermediate-agent vendor-tag strip
Related Commands Command
pppoe intermediate-agent
(interface)
pppoe intermediate-agent
trust
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-596
pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag strip
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Enables the PPPoE Intermediate Agent feature on an interface.
Sets the trust configuration of an interface.
Chapter 2