Cisco Catalyst 4500 Series Configuration Manual page 963

Chapter 2
Channel group 30
Dual-Active Partner Partner Partner
Port Detect Capable Name Port Version
Te3/1 Yes VS1-Reg2 Te1/1/7 1.1
Te4/1 Yes VS1-Reg2 Te2/2/8 1.1
Channel group 32
Dual-Active Partner Partner Partner
Port Detect Capable Name Port Version
Gi1/43 Yes VS3 Gi1/1/43 1.1
Gi1/44 Yes VS3 Gi1/1/44 1.1
Gi1/45 Yes VS3 Gi1/1/45 1.1
Gi1/46 Yes VS3 Gi2/1/46 1.1
Gi1/47 Yes VS3 Gi2/1/47 1.1
Gi1/48 Yes VS3 Gi2/1/48 1.1
Gi2/3 Yes VS3 Gi1/1/1 1.1
Gi2/4 Yes VS3 Gi2/1/1 1.1
Switch#
The following example shows how to display internal PAgP information:
Switch# show pagp 1 internal
Flags:
Timers: H - Hello timer is running.
Channel group 1
Port
Fa5/4
Fa5/5
Switch#
The following example shows how to display PAgP neighbor information for all neighbors:
Switch# show pagp neighbor
Flags:
Channel group 1 neighbors
Port
Fa5/4
Fa5/5
Channel group 2 neighbors
Port
Fa5/6
Fa5/7
Switch#
Related Commands Command
pagp learn-method
pagp port-priority
S - Device is sending Slow hello.
A - Device is in Auto mode.
S - Switching timer is running.
Flags State Timers
SC U6/S7
SC U6/S7
S - Device is sending Slow hello.
A - Device is in Auto mode.
Partner
Name
JAB031301
JAB031301
Partner
Name
JAB031301
JAB031301
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
C - Device is in Consistent state.
Q - Quit timer is running.
I - Interface timer is running.
Hello Partner PAgP
Interval Count Priority
30s 1 128
30s 1 128
C - Device is in Consistent state.
P - Device learns on physical port.
Partner Partner
Device ID Port
0050.0f10.230c 2/45
0050.0f10.230c 2/46
Partner Partner
Device ID Port
0050.0f10.230c 2/47
0050.0f10.230c 2/48
Description
Learns the input interface of the incoming packets.
Selects a port in hot standby mode.
show pagp
Learning
Method IfIndx
Any 129
Any 129
Partner Group
Age Flags Cap.
2s SAC 2D
27s SAC 2D
Partner Group
Age Flags Cap.
10s SAC 2F
11s SAC 2F
2-915