Cisco Catalyst 4500 Series Configuration Manual page 62
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
authentication control-direction
Using the both keyword or using the no form of this command changes the port to its bidirectional
default setting.
Setting the port as bidirectional enables 802.1X authentication with Wake-on-LAN (WoL).
You can verify your settings by entering the show authentication privileged EXEC command.
Examples
The following example shows how to enable unidirectional control:
Switch(config-if)# authentication control-direction in
Switch(config-if)#
The following example shows how to enable bidirectional control:
Switch(config-if)# authentication control-direction both
Switch(config-if)#
The following example shows how to return to the default settings:
Switch(config-if)# no authentication control-direction
Switch(config-if)#
Related Commands
Command
show authentication
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-24
Chapter 2
Description
Displays Authentication Manager information.
Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-30934-01
Advertisement
Table of Contents
