remote-span
remote-span
To convert a VLAN into an RSPAN VLAN, use the remote-span command. To convert an RSPAN
VLAN to a VLAN, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
RSPAN is disabled.
Command Modes
VLAN configuration mode
Command History
Release
12.1(20)EW
Examples
The following example shows how to convert a VLAN into an RSPAN VLAN:
Switch# config terminal
Switch(config)# vlan 20
Switch(config-vlan)# remote-span
Switch(config-vlan)# end
Switch#
Related Commands
Command
monitor session
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-624
remote-span
no remote-span
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Enables the SPAN sessions on interfaces or VLANs.
Chapter 2