Cisco Catalyst 4500 Series Configuration Manual page 354

ip arp inspection vlan logging
Examples The following example shows how to configure an ARP inspection on VLAN 1 to add packets to a log
on matching against the ACLs with the logging keyword:
Switch# config terminal
Enter configuration commands, one per line.
Switch(config)# ip arp inspection vlan 1 logging acl-match matchlog
Switch(config)# end
Switch# show ip arp inspection vlan 1
Source Mac Validation
Destination Mac Validation : Disabled
IP Address Validation
Vlan
----
Vlan
----
Switch#
Related Commands Command
arp access-list
show ip arp inspection
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-314
Configuration
-------------
1 Enabled
ACL Logging
-----------
1 Acl-Match
End with CNTL/Z.
: Enabled
: Disabled
Operation ACL Match
--------- ---------
Active
DHCP Logging
------------
Deny
Description
Defines an ARP access list or adds clauses at the end of a
predefined list.
Displays the status of dynamic ARP inspection for a
specific range of VLANs.
Chapter 2
Static ACL
----------