Cisco Catalyst 4500 Series Configuration Manual page 449
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
key chain macsec
To create or modify a macsec keychain, and enter keychain-macsec configuration mode, use the key
chain key-chain-name macsec command
To disable this feature, use the no form of this command.
Syntax Description
key-chain-name
Command Default
None.
Command Modes
Global configuration mode
Command History
Release
3.9.0E
.
Examples
The following example shows how to enable protocol tunneling for the CDP packets:
Switch(config terminal)# key chain mac_chain macsec
Switch(config-keychain-macsec)#
Related Commands
Command
key chain key-chain-name macsec
no key chain
Specifies the name of the keychain. The maximum length is 32.
Modification
This command was introduced on the Cisco Catalyst 4500-E and 4500-X
series switches.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
key chain macsec
2-409
Advertisement
Table of Contents
