Cisco Catalyst 4500 Series Configuration Manual page 163

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear netflow-lite exporter statistics
NetFlow-lite is supported only on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches.
Note
To clear the collector statistics, use the clear netflow-lite exporter statistics command.
Syntax Description
exporter-name
Command Default None
Command Modes Privileged EXEC mode
Command History Release
15.0(2)SG
Examples The following examples show how to clear statistics of a packet sampler at a monitor:
Switch# clear netflow-lite exporter e1 statistics
Related Commands Command
clear netflow-lite monitor
statistics interface
clear netflow-lite exporter exporter-name statistics
Specifies an exporter.
Modification
Command introduced on on the Catalyst 4948E and Catalyst 4948E-F
Ethernet switches.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Clears statistics of a packet sampler at a monitor.
clear netflow-lite exporter statistics
2-125