Cisco Catalyst 4500 Series Configuration Manual page 990

show pppoe intermediate-agent interface
show pppoe intermediate-agent interface
To display PPPoE Intermediate Agent configuration and statistics (packet counters), use the
show pppoe intermediate-agent interface command.
Syntax Description
interface interface
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.2(50)SG
Examples The following example shows how to display PPPoE Intermediate Agent configuration:
Switch# show pppoe intermediate-agent information
Switch PPPoE Intermediate-Agent is enabled
PPPoE Intermediate-Agent trust/rate is configured on the following Interfaces:
Interface
----------------------- --------
GigabitEthernet3/4
PPPoE Intermediate-Agent is configured on following VLANs:
2-3
GigabitEthernet3/7
PPPoE Intermediate-Agent is configured on following VLANs:
2-3
The following example shows how to display PPPoE Intermediate Agent statistics on an interface:
Switch# show pppoe intermediate-agent statistics interface g3/7
Interface : GigabitEthernet3/7
Packets received
All = 3
PADI = 0 PADO = 0
PADR = 0 PADS = 0
PADT = 3
Packets dropped:
Rate-limit exceeded = 0
Server responses from untrusted ports = 0
Client requests towards untrusted ports = 0
Malformed PPPoE Discovery packets = 0
Vlan 2: Packets received PADI = 6 PADO = 0 PADR = 6 PADS = 0 PADT = 6
Vlan 3: Packets received PADI = 4 PADO = 0 PADR = 4 PADS = 0 PADT = 4
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-942
show ppoe intermediate-agent information interface interface
show ppoe intermediate-agent statistics interface interface
Interface for which information or statistics are displayed.
Modification
This command was introduced on the Catalyst 4500 series switch.
IA Trusted Vsa Strip
------- ---------
no yes yes
no no no
Chapter 2
Rate limit (pps)
----------------
unlimited
unlimited
OL-30934-01