Show Errdisable Recovery - Cisco Catalyst 4500 Series Configuration Manual
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
show errdisable recovery
Use the show errdisable recovery user EXEC command to display the error-disabled recovery timer
information.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
12.1(19)EW
Usage Guidelines
A gbic-invalid error-disable reason refers to an invalid small form-factor pluggable (SFP) module
interface.
Examples
This is an example of output from the show errdisable recovery command:
Switch> show errdisable recovery
ErrDisable Reason
-----------------
udld
bpduguard
security-violatio
channel-misconfig
vmps
pagp-flap
dtp-flap
link-flap
l2ptguard
psecure-violation
gbic-invalid
dhcp-rate-limit
unicast-flood
storm-control
arp-inspection
loopback
Timer interval:300 seconds
Interfaces that will be enabled at the next timeout:
Interface
---------
Gi1/0/2
show errdisable recovery
Modification
This command was introduced on the Catalyst 4500 series switch.
Display includes the status of storm control.
Timer Status
--------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Errdisable reason
-----------------
link-flap
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Time left(sec)
--------------
279
show errdisable recovery
2-719
Advertisement
Table of Contents
