Show Interfaces Mtu - Cisco Catalyst 4500 Series Configuration Manual

show interfaces mtu

show interfaces mtu
To display the maximum transmission unit (MTU) size of all the physical interfaces and SVIs on the
switch, use the show interfaces mtu command.
Syntax Description module mod
Command Default
This command has no default settings.
Command Modes EXEC
Command History Release
12.1(13)EW
Examples
The following example shows how to display the MTU size for all interfaces on module 1:
Switch> show interfaces mtu module 1
Port
Gi1/1
Gi1/2
Switch>
Related Commands Command
mtu
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-752
show interfaces mtu [module mod]
(Optional) Limits the display to interfaces on a specific module.
Modification
This command was introduced on the Catalyst 4500 series switch.
Name MTU
1500
1500
Description
Enables jumbo frames on an interface by adjusting the
maximum size of a packet or maximum transmission unit
(MTU).
Chapter 2
OL-30934-01