Clear Vlan Counters - Cisco Catalyst 4500 Series Configuration Manual
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
clear vlan counters
To clear the software-cached counter values to start from zero again for a specified VLAN or all existing
VLANs, use the clear vlan counters command.
Syntax Description
vlan-id
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(13)EW
Usage Guidelines
If you do not specify a vlan-id value; the software-cached counter values for all the existing VLANs are
cleared.
Examples
The following example shows how to clear the software-cached counter values for a specific VLAN:
Switch# clear vlan 10 counters
Clear "show vlan" counters on this vlan [confirm] y
Switch#
Related Commands
Command
show vlan counters
clear vlan [vlan-id] counters
(Optional) VLAN number
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Displays VLAN counter information.
clear vlan counters
2-135
Advertisement
Table of Contents
