Cisco Catalyst 4500 Series Configuration Manual page 165

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear nmsp statistics
To clear the Network Mobility Services Protocol (NMSP) statistics, use the clear nmsp statistics
command. This command is available only when your switch is running the cryptographic (encrypted)
software image.
Syntax Description This command has no arguments or keywords.
Command Default No default is defined.
Command Modes
Privileged EXEC mode
Command History Release
12.2(52)SG
Examples
The following example shows how to clear NMSP statistics:
Switch# clear nmsp statistics
Switch#
You can verify that information was deleted by entering the show nmsp statistics command.
Related Commands Command
show nmsp
clear nmsp statistics
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Displays the NMSP information.
clear nmsp statistics
2-127