Cisco Catalyst 4500 Series Configuration Manual page 250

device-sensor notify
device-sensor notify
To enable client notifications and events for TLV changes, use the device-sensor notify command in
global configuration mode. To disable client notifications and accounting events for TLV changes, use
the no form of this command.
Syntax Description
all-changes
new-tlvs
Command Default Client notifications and accounting events are generated only for new TLVs.
Command Modes Global configuration
Command History Release
IOS XE 3.4.0SG and
IOS 15.1(2)SG)
Usage Guidelines By default, for each supported peer protocol, client notifications and accounting events will only be
generated when an incoming packet includes a TLV that has not been previously received in the context
of a given session.
To enable client notifications and accounting events for all TLV changes, where either a new TLV has
been received or a previously received TLV has been received with a different value, use the
device-sensor notify all-changes command.
To return to the default behavior, use the device-sensor notify new-tlvs or the default device-sensor
notify command.
Examples The following example shows how to enable client notifications and accounting events for all TLV
change:
Switch> enable
Switch# configure terminal
Switch(config)# device-sensor notify all-changes
Related Commands Command
debug device-sensor
device-sensor filter-list Creates a CDP or LLDP filter containing a list of options that can be included
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-212
device-sensor notify all-changes | new-tlvs
no device-sensor notify all-changes | new-tlvs
Enables client notifications and accounting events for all TLV changes.
Enables client notifications and accounting events for only new TLV changes.
Modification
Command introduced on the Catalyst 4500 Series switch.
Description
Enables debugging for Device Sensor.
or excluded in the Device Sensor output.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-30934-01