Cisco Catalyst 4500 Series Configuration Manual page 951

Chapter 2
Fa0/3
Fa0/10 Source
In the preceding display, Status is defined as follows:
•
•
•
This is an example of output from the show mvr interface interface-id command:
switch# show mvr interface fa0/10
Port
----
Fa0/10
This is an example of output from the show mvr interface interface-id members command:
Switch# show mvr interface fastethernet1/0/6 members
239.255.0.0
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
Related Commands Command
mvr (global configuration)
mvr (interface configuration)
show mvr
show mvr members
Receiver Trunk
Access
Active means that the port is part of a VLAN.
Up/Down means that the port is forwarding or nonforwarding.
Inactive means that the port is not yet part of any VLAN.
Type Mode
---- ----
RECEIVER Trunk
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
3000 ACTIVE/UP
10 ACTIVE/UP
VLAN Status
---- -------
201 ACTIVE/DOWN
Description
Enables and configures multicast VLAN registration on the
switch.
Configures MVR ports.
Displays the global MVR configuration on the switch.
Displays all receiver ports that are members of an MVR
multicast group.
show mvr interface
DISABLED
DISABLED
Immediate Leave
---------------
DISABLED
2-903