Show Environment - Cisco Catalyst 4500 Series Configuration Manual

show environment

show environment
To display the environment alarm, operational status, and current reading for the chassis, use the show
environment command.
Syntax Description alarm
status
chassis
fantray
powersupply
supervisor
temperature
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(12c)EW
Examples
The following example shows how to display information about the environment alarms, operational
status, and current temperature readings for the chassis:
Switch# show environment
no alarm
Chassis Temperature
Chassis Over Temperature Threshold
Chassis Critical Temperature Threshold = 95 degrees Celsius
Power
Supply
------
PS1
PS2
Power Supply
(Nos in Watts)
--------------
PS1
PS2
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-714
show environment [alarm] | [status [chassis | fantray | powersupply | supervisor]] |
[temperature]
(Optional) Specifies the alarm status of the chassis.
(Optional) Specifies the operational status information.
(Optional) Specifies the operational status of the chassis.
(Optional) Specifies the status of the fan tray, and shows fan tray power consumption.
(Optional) Specifies the status of the power supply.
(Optional) Specifies the status of the supervisor engine.
(Optional) Specifies the current chassis temperature readings.
Modification
This command was introduced on the Catalyst 4500 series switch.
Support for the ability to display generic environment information with the show
environment command was added.
Model No Type
--------------- ---------
PWR-C45-1400AC AC 1400W
none --
Max Min
Inline Inline
------ ------
0
-- --
= 32 degrees Celsius
= 75 degrees Celsius
Fan
Status Sensor
----------- ------
good good
-- --
Max Min Absolute
System System Maximum
------ ------ --------
0 1360 1360 1400
-- -- --
Chapter 2
OL-30934-01