Cisco Catalyst 4500 Series Configuration Manual page 966

show policy-map
show policy-map
To display information about the policy map, use the show policy-map command.
Syntax Description
policy_map_name
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples The following example shows how to display information for all the policy maps:
Switch# show policy-map
Policy Map ipp5-policy
class
set ip precedence 6
Switch#
The following example shows how to display information for a specific policy map:
Switch# show policy ipp5-policy
Policy Map ipp5-policy
class
set ip precedence 6
Switch#
Related Commands Command
class-map
policy-map
show class-map
show policy-map interface
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-918
show policy-map [policy_map_name]
(Optional) Name of the policy map.
Modification
This command was introduced on the Catalyst 4500 series switch.
ipp5
ipp5
Description
Creates a class map to be used for matching packets to the
class whose name you specify and to enter class-map
configuration mode
Creates a policy map that can be attached to multiple ports
to specify a service policy and to enter policy-map
configuration mode
Displays class map information.
Displays the statistics and configurations of the input and
output policies that are attached to an interface.
Chapter 2
OL-30934-01