Debug Ipc - Cisco Catalyst 4500 Series Configuration Manual

debug ipc

debug ipc
To debug the IPC activity, use the debug ipc command. To disable the debugging output, use the no form
of this command.
Syntax Description
all
errors
events
headers
packets
ports
seats
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(12c)EW
Examples The following example shows how to enable the debugging of the IPC events:
Switch# debug ipc events
Special Events debugging is on
Switch#
Related Commands Command
undebug ipc (same as no debug
ipc)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-162
debug ipc {all | errors | events | headers | packets | ports | seats}
no debug ipc {all | errors | events | headers | packets | ports | seats}
Enables all IPC debugging.
Enables the IPC error debugging.
Enables the IPC event debugging.
Enables the IPC header debugging.
Enables the IPC packet debugging.
Enables the debugging of the creation and deletion of ports.
Enables the debugging of the creation and deletion of nodes.
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Disables debugging output.
OL-30934-01