Please Note - Mitel 430 System Manual

Wiring Adapter
WA-TS1
WA-2W
WA-1PRI
1) The wiring adapter is not part of the equipment supplied with this interface card and must be ordered sepa-
rately.
2) On the ESST terminal card the jumper must always be fitted in position T (see Fig. 24).
3) The wiring adapter is only part of the equipment supplied with order variant Mitel 415/430.
4) For test purposes the PRI interface is also routed in parallel to port X.2.

Please note:

• The arrows on the wiring adapters specify the plug-in orientation of the required port
assignment.
• On the ESST terminal card the jumper must always be fitted in position T (see figure
below). The port assignment is specified by the wiring adapter alone.
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Plug-in ori-
Interface card
entation
1)
TIC-4TS SSTT
1)
TIC-4TS SSST
1)
TIC-2TS SSTT
1)
TIC-2TS SSST
1)2)
ESST SSTT
1)2)
ESST SSST
ODAB SSTT
3)
ETAB4 –
3)
EADP4 –
1)
EAD4C –
1)
EAD4V –
1)
EAAB2 –
TIC-4AB –
TIC-2AB –
TIC-1PRI –
Port number
X.1 X.2
S S
S S
S S
S S
S S
S S
I/O 1,2 I/O 3,4
FXS FXS
DSI DSI
DSI DSI
DSI DSI
– –
FXO FXO
FXO FXO
4)
PRI Test
Installation
X.3 X.4
T T
S T
– –
– –
– –
– –
ab/Door –
Intercom
FXS FXS
DSI DSI
DSI DSI
DSI DSI
FXO FXO
FXO FXO
– –
– –
99