Firmware System Mitel Sip-Dect - Mitel 430 System Manual

Operation and Maintenance
There is only one firmware for the cordless Mitel 600 DECT series phones. It is in-
cluded in the communication server's software package and stored in the file system of
the communication server.
DECT cordless phones Office 135 and Office 160
The firmware for the Office 135 and Office 160 cordless phones, is updated via radio
(Air-Download). This requires the cordless phone to be logged on to system A.
The memory in the cordless phones is a Flash memory. The Flash memory contains an
area that cannot be modified. This area contains the cordless phone's boot software.
The firmware for the cordless phones is contained in the communication server soft-
ware package. The loaded firmware is tested when the cordless phone starts up. If the
loaded firmware is not identical to the version in the system software, the system will
initiate an Air-Download. The firmware is loaded from the communication server onto
the cordless phones via radio and stored in the Flash memory.
To be able to run an Air-Download, you need to ensure that the cordless phone con-
tains a functional firmware.
The cordless phone remains fully functional during an Air-Download. The new loaded
firmware is activated only once the Air-Download has been successfully completed. A
restart is carried out on the cordless phone.
6. 2. 4

Firmware System Mitel SIP-DECT

With Mitel SIP-DECT and Mitel 600 DECT series phones comprehensive solutions can
be provided for wireless telephony on IP-based networks. This requires RFP radio
units that can be directly connected to other VoIP devices on the LAN.
OpenMobilityManager (OMM) is installed on one of the RFP radio units or on a PC,
which constitutes the management interface for the Mitel SIP-DECT solution.
Mitel 600 DECT phones have loaded a different firmware in an Mitel SIP-DECT system
from the one in an MiVoice Office 400 DECT system.
The firmware for the RFP radio units and for the Mitel 600 DECT cordless phones is
preferably located on a firmware server. Automatic firmware update is then possible.
The WebAdmin Configuration / System / DECT/SIP-DECT / SIP-DECT ( =9y) view
contains a global predefined Mitel FTP server. Various firmware versions are stored on
this server, according to different communication server software releases. The prede-
fined entry in WebAdmin is adjusted to each communication server release if neces-
sary. You can also indicate the address of another firmware server.
Firmware designations for Mitel SIP-DECT (examples):
aafon6xxd.dnld:
Firmware for Mitel 600 DECT cordless DECT phones.
188
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016