Mitel 430 System Manual page 58

Expansion Stages and System Capacity
Max. number...
Backup communication servers for Dual Homing
Primary communication servers for Dual Homing
Blacklist
Call number entries in the blacklist
Number of CLIP based routing tables
Total call number entries in call distribution tables
Call data memory internal (number of records)
Private contacts
Call list entries for each of the 3 call lists per phone
Total call list entries
Configured keys
Busy lamp field keys on Mitel SIP phones in total
Busy lamp field keys per Mitel SIP phone
Same users on busy lamp field keys on Mitel SIP phones
Expansion key modules on DSI terminals
Expansion key modules on IP system phones
Expansion key modules Mitel M670, Mitel M675, Mitel M680,
Mitel M685
Alpha keyboardMitel K680
Alpha keyboard (AKB)
1) Up to 20 users are possible with virtual terminals and integrated mobile/external phones.
2) Up to 100 users are possible with virtual terminals and integrated mobile/external phones.
3) Only 1 operator console, 1 MiVoice 2380 IP, 1 BluStar 8000i , 1 Mitel BluStar for PC, 1 Mitel SIP-DECT and
2 DECT- cordless phones are possible for each user.
4) Limited by the maximum number of terminals
5) In the Secure VoIP modes the maximum values cannot be achieved with the selection i the DSP settings:
Mitel 415: Secure G.711
Mitel 430: Secure G.711
nels.
6) For IP-IP connections maximum 8
7) Audio channels can be used for voice mail, auto attendant, queue with announcement, call recording, an-
nouncement with audio file, or conference bridge. Announcement service and music on hold use their own
resources.
8) Of relevance only to certain countries such as Brazil
9) 12 of them are masked (not configurable)
10)With global call distribution
11)Depending on the phone type
12)The value applies to CDE with destination KT line. With MiVoice Office 400 multiple destinations (User + KT
or KT + UG) the value is reduced to 4.
13)Depending on the highest number of line keys, configured for the same line. The following pairs apply (line
keys per line / total line keys): (8/24), (7/28), (6/36), (5/50), (4/60), (3/60), (2/60), (1/60).
14)The call data memory is only used if the output destination is blocked (e.g. printer jam).
58
14)
VoIP mode: 1 7 = 7 channels, VoIP mode
VoIP mode: 2 7 = 14 channels, VoIP mode
Mitel 415 Mitel 430
50 50
50 50
1 1
1000 1000
10 10
250 250
300 300
8000 8000
30 30
15000 15000
4000 4000
200 200
50 50
10 10
4)
30 60
4)
30 60
4)
30 60
10 50
10 40
Secure G.711/G.729: 1 × 5 = 5 channels.
G.711/G.729: 3 × 5 = 15 chan-
Secure
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
AIN with
Mitel 430 as
Master
50
50
1
1000
10
250
300
8000
30
15000
4000
200
50
10
100
100
100
50
50