Configuration Notes; Licences - Mitel 430 System Manual

Configuration
3. Checking licences
4. Configuring media resources
5. Setting time and date
6. Checking network interfaces
7. Setting up SIP providers and accounts
8. Specifying user permissions
9. Create users and DDI numbers
10.Checking outgoing routing
11.Setting up the auto attendant
12.Setting up music on hold
13.Setting up an announcement service
14.Entering abbreviated dialling contacts
15.Saving configuration data
For each step, the upper half of the screen displays the configuration overview; the
right-hand side contains notes and instructions about the step you have selected. The
WebAdmin online help can be called up for further help.
You can skip individual configuration assistant steps or call up additional views of the
WebAdmin navigation tree. To hide the configuration assistant again, untick the control
box on the WebAdmin start page.
5. 6

Configuration Notes

The sections below contain information that may be useful before, during or after a
configuration.
5. 6. 1

Licences

All the features (even those subject to licences) can be configured without a valid li-
cence.
If you use a function or feature that requires a licence but do not actually have the rele-
vant licence, a trial licence is acquired automatically; it is also shown in the overview of
activated licences (Licenses =q9 view). With a trial licence you can now use the
function or feature free of charge for 60 days. The trial licence's expiry date is indicated
under Status. This procedure can only be used once for each function or feature.
Thereafter you must acquire a licence. The licence overview (Tab. 31) shows which
trial licences are available.
All licences are contained in a licence code, which you can obtain from your authorised
dealer. Each licence code can only be used for one communication server. To licence
176
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016