Boot Software; System-Specific Data; Updating Configuration Data - Mitel 430 System Manual

Operation and Maintenance
file browser you have the possibility to view, upload, replace or delete the folders and
files in the file system. The file system can also be accessed with an FTP client (see
also "File management", page 177).
Functions for backing up and restoring configuration data and audio data are available
in the WebAdminMaintenance
page 179).
Note:
Modifying or deleting files on the file system of the communication server can result in a system
that is no longer able to run.
6. 1. 1. 3

Boot software

The boot software is stored in a different Flash memory, which allows the communica-
tion server to start up in the boot mode, even if without executable system software.
6. 1. 1. 4

System-specific data

The system-specific data (system ID, system type, sales channel, licence code, gener-
ation, DECT identification numbers, IP address of the communication server) is stored
on the EIM card (chip card). This data is not deleted by a first start of the PBX, and re-
mains available. It can be ported to a different communication server by replacing the
EIM card.
6. 1. 2

Updating configuration data

There are system-wide, user-related and terminal-related configuration data:
• System-wide configuration data can only be modified with WebAdmin.
• Terminal configuration data such as key assignments or ringing melodies can be
modified either directly on the terminal, with Self Service Portal or with WebAdmin.
With some system phones configuration is also possible using the web user inter-
face or with the help of configuration files.
• User-related configuration data such as private contacts or CFUs is valid for all the
terminals assigned to the user and can be configured using WebAdmin, partly via
Self Service Portal, or directly on the terminal itself.
Access to the configuration data via WebAdmin is regulated by a User Access Control
with user accounts, authorization profiles and authorization levels. More information
can be found in the Chapter "User access control", page 169.
184
/ Data backup ( =um) view (see also "Data backup",
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016