Important Note For Headset Users; Adjust The Viewing Angle - Mitel 5212 User Manual

Important Note for Headset Users

Mitel Networks Headsets with Feature Control Switch must be installed in the
dedicated headset jack on the back of the phone. Installation will disable
your handset microphone. Disconnecting the headset at the jack or at the
quick-disconnect plug restores handset operation.

Adjust the viewing angle

The stand built into your phone tilts to give you a better view of the keys.
To tilt your telephone for better viewing:
1. Turn the phone so that the front faces away from you.
2. Hold the base unit firmly and press the release tabs on the sides of the
stand to detach the base unit.
3. Hinge the hooks of the base unit into the notches on the back of the
phone and snap into place as follows:
a. For a high-angle mount, hinge the two lower hooks into the bottom set
of notches and snap the two upper hooks into the middle set of notches.
b. For a low-angle mount, hinge the two lower hooks into the middle set
of notches and snap the two upper hooks into the top set of notches.
-8-