Operating Modes And Display Priorities - Mitel 430 System Manual

Operation and Maintenance
Different actions are carried out depending on how long the key is pressed and the
system's current operating state. The duration of the keypress is divided into three time
intervals:
Tab. 90 Keypress duration, pilot key
Designation
Short keypress (Shortclick)
Long keypress (Long Click)
Very long keypress (Very Long Click)
6. 4. 3

Operating modes and display priorities

The system software of the Mitel 415/430 recognizes various operating modes, which
are displayed with the LEDs F0, F1, F2, F3, F4 and SYS. In the following these dis-
plays are referred to as combination patterns or patterns and are numbered for easy
reference.
The various operating modes have different display priorities, i.e.a mode with a higher
display priority will cover up the combination pattern of a mode with a lower display pri-
ority. The combination patterns covered up are stored and continually updated in the
background, which means that no patterns are lost.
The table below lists all the operating modes and their display priorities. The highest
display priority is 1; the lowest, 7.
Tab. 91 Operating modes and display priorities
Operating mode
Shutdown Mode
Error Mode
Startup Mode
Application Command Mode
Boot Command Mode
Warning Mode
Wiring Adapter Malfunction Mode
Feature Mode
Normal Mode
202
ID
SC
LC
VLC
Display pri-
Remarks
ority
1 • After the system is shut down
• Shutdown mode lasts for 3 minutes. Thereafter the system
automatically changes to Startup Mode.
1 • System is no longer able to run
2 • When power is supplied
• After a restart/first start
• Used as a progress indicator during startup
3 • Used for carrying out certain functions
• This mode is exited automatically if no input is made within 20
seconds.
4 • System is still capable of running but the system function may
be impaired.
• Problem needs to be remedied as soon as possible.
5 • System is running but a problem has been detected on one or
more wiring adapter slots.
6 • System is running normally but one function is active.
7 • System is running normally.
Keypress duration
0...2 seconds
2...10 seconds
More than 10 seconds
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016